
Black plate (48,1)
Holden Volt Owner Manual (Holden-Localizing-Holden-7337564) - 2014 -
CRC - 11/8/13
9-48
Driving and Operating
Electrical Requirements
for Battery Charging
The AC outlet must have a
grounded, dedicated wall outlet.
That means there should be no
other major appliances connected to
the same circuit. If it is not a
dedicated circuit, the current rating
of the outlet circuit breaker could be
exceeded and cause it to trip or
open. The vehicle can be charged in
the reduced level mode. See
“
Charge Level Selection
”
under
. Reduced
level mode allows a non-dedicated
circuit to be used but increases the
charging time.
This vehicle is capable of being
charged with standard vehicle
charging equipment complying with:
.
SAE J1772
.
SAE J2847
–
2
.
IEC 61851-1
.
IEC 61851-22
.
IEC 61851-23
.
IEC 61851-24
.
IEC 62196-1
.
IEC 62196-2
.
IEC 62196-3
.
ISO 15118
The following are the minimum
continuous duty rating requirements
for circuits used to charge this
vehicle:
.
230 V/10 amp
Charging equipment with a rating of
at least 230 V/16 amp will provide
the fastest charging time to
recharge the high voltage battery.
230 V/32 amp circuits provide
flexibility for future vehicle charging
needs. Always follow your charging
equipment installation instructions.
Contact your dealer for more
information.
{
Caution
Do not use portable or stationary
backup generating equipment to
charge the vehicle. This may
cause damage to the vehicle's
charging system. Only charge the
vehicle from utility supplied
power.