Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
72
Seats and Restraints
Secure the child in the restraint in
accordance with the manufacturer's
instructions.
If unsure about installing a child
restraint anchor fitting, contact an
approved restraint fitting station or a
Holden Dealer.
Automatic Locking Retractor
(ALR) Seat Belts
ALR seat belts are provided at the
second row seating positions. Use
these in conjunction with a top
tether strap when a non-ISOFIX
child seat is being used.
Extend the seat belt fully and then
fit the belt around the applicable
locations on the child restraint and
fasten the buckle. Refer to the
installation instructions supplied with
the child restraint.
Allow the belt to retract. While the
belt is retracting, a clicking noise
can be heard which indicates the
ALR mechanism is functioning. The
seat belt is locked and cannot be
extended until fully retracted,
enabling the belt to be fitted
securely to the child restraint.
To release the locking mechanism,
undo the buckle and allow the seat
belt to fully retract. It will then
function as a normal Emergency
Locking Retractor (ELR) seat belt
until fully extended again.
ISOFIX Child Restraint
Systems
ISOFIX anchor locations are marked
by a
H
on the second row
seatback.
Fasten vehicle-approved ISOFIX
child restraints to the ISOFIX
anchors.
Note
Ensure the seat belt buckles are
placed out of the way of the
child seat.
In addition to the ISOFIX mounting
anchors, fasten the top-tether strap
to the top-tether anchor points.