Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
288
Vehicle Care
Buying New Tyres
Refer to the tyre placard on the
vehicle for tyre size and load rating.
Using a different size or type of tyre
may affect:
.
Ride
.
Handling
.
Speedometer accuracy
.
Vehicle ground clearance
.
Vehicle payload capacity
.
Maximum vehicle speed
.
Tyre clearance
.
Tyre chain clearance
Tyres with heavy treads and those
made for better grip in the wet,
should only be operated within the
limits recommended by the
manufacturer.
Tyres with a higher speed or load
rating are acceptable, provided they
are fitted to a suitable rim size.
{
Warning
Tyres with a lower speed or load
rating are NOT acceptable for
fitment to the vehicle.
Replacing the factory fitted wheels
and tyres with non-genuine wheels
and tyres may affect the vehicle
warranty as well as the vehicle's
insurance policy.
Contact a Holden Dealer for advice
on suitable tyres.
Wheel Alignment and
Tyre Balance
Improper wheel alignment or
balance can cause:
.
Tyres to wear fast and unevenly.
.
The vehicle to pull to one side.
.
Vibration.
If any of these problems exists,
have the vehicle checked by a
dealer.
Tyre condition is checked when the
vehicle is serviced by a Holden
Dealer. They are able to diagnose
any unusual signs of wear. If tyres
are rotated, it is recommended that
balance be checked at the
same time.
Tyre Chains
{
Warning
Tyre Chains are only permitted on
front tyres of size; 235/65 R18.
.
Use low profile chains that
add no more than 12mm
thickness to the tyre tread
and inner sidewall.
.
Use chains that are the
correct size for the tyres.
.
Install the chains on the
tyres of the front axle only.
.
Drive slowly and follow the
chain manufacturer's
instructions.
(Continued)
