HOLDEN Equinox LS, Руководство пользователя

Страница: 272 / 354

Holden Equinox Owner Manual (Holden-Localizing-Holden-12561772) -
2019 - crc - 6/26/18
270 Vehicle Care
If there is no sign of steam, idle the
engine for three minutes while
parked. If the engine coolant
temperature gauge is still in the
overheat zone or an overheat DIC
message displays, turn off the
engine until it cools down.
Washer Fluid
The washer fluid reservoir supplies
fluid to the front windscreen and
rear window washers.
Check the level regularly.
Adding Washer Fluid
1. Open the cap with the washer
symbol on it. See Engine
Compartment Overview 0 257
for reservoir location.
2. Add clean water mixed with the
correct amount of washer fluid
additive. Refer to a Holden
dealer
Do not use ordinary soap or
detergent as they froth up and
damage the wiper blades.
3. Secure the cap.
Brakes
The disc brake pads have built-in
wear indicators that make a
high-pitched warning sound when
the brake pads are worn and new
pads are needed. The sound can
come and go, or can be heard all
the time when the vehicle is moving,
except when applying the brake
pedal firmly.
Have the brakes serviced as soon
as possible.
Some driving conditions or climates
can cause a brake squeal when the
brakes are first applied or lightly
applied. This does not mean
something is wrong with the brakes.
Brake Fluid
Note
For manual transmission vehicles,
the brake fluid reservoir is also used
for the hydraulic clutch system.
{
Warning
Clutch/brake fluid is poisonous
and corrosive and will damage
the paint finish of the vehicle if
spilt.
Checking the Brake Fluid Level
The brake fluid reservoir is located
in the engine compartment. See
Engine Compartment Overview
0 257 .
Check the brake fluid reservoir
weekly.
The level should be between the
MIN and MAX area.
If the fluid level is correct, do not
remove the reservoir cap, as brake
fluid exposed to the atmosphere will
quickly absorb moisture.