HOLDEN Colorado MY17 RG, Руководство пользователя

Страница: 215 / 298

Holden Trailblazer Owner Manual (GMSA-Localizing-Australia - 10460368) -
2017 - crc - 6/29/16
Driving and Operating 213
up if a moving vehicle is detected in
that blind zone. If the turn signal is
activated in the same direction of a
detected vehicle, this display will
flash as an extra warning not to
change lanes.
SBZA can be disabled through
vehicle settings. See
“ Collision
Detection Systems ” under “ Vehicle ”
in the Infotainment System. If SBZA
is disabled by the driver, the SBZA
mirror displays will not light up.
When the System Does Not
Seem to Work Properly
SBZA displays may not come on
when passing a vehicle quickly, for
a stopped vehicle, or when towing a
trailer. The SBZA detection zones
that extend back from the side of
the vehicle do not move further back
when a trailer is towed. Use caution
while changing lanes when towing a
trailer. SBZA may alert to objects
attached to the vehicle, such as a
trailer, bicycle, or object extending
out to either side of the vehicle. This
is normal system operation; the
vehicle does not need service.
SBZA may not always alert the
driver to vehicles in the side blind
zone, especially in wet conditions.
The system does not need to be
serviced. The system may light up
due to guardrails, signs, trees,
shrubs, and other non-moving
objects. This is normal system
operation; the vehicle does not need
service.
SBZA may not operate when the
SBZA sensors in the left or right
corners of the rear bumper are
covered with mud, dirt, snow, ice,
or slush, or in heavy rainstorms.
If the SBZA displays do not light up
when vehicles are in the blind zone
and the system is clean, the system
may need service. Take the vehicle
to your dealer.
When SBZA is disabled for any
reason other than the driver turning
it off, the Side Blind Zone Alert On
option will not be available on the
personalisation menu.
Rear Vision
Camera (RVC)
The vehicle may have a RVC.
{
Warning
Never rely solely on the rear
vision camera when reversing the
vehicle.
There is a blind spot that can not
be sensed by the rear vision
camera.
The rear vision camera is not
intended to replace the driver's
judgement or attention to the rear
of the vehicle when reversing.
Before entering the vehicle,
always check that the area
around the vehicle is clear of
obstacles and people.
Always perform head checks and
use the vehicle's mirrors when
reversing.
(Continued)