FM-ONE
HOKUTO DENSHI
CO;LTD;
株式会社
15
A3: Log
Program Log function working with
“Program” button
“Program” button enables you to write program onto your target flash memory directly. This function
records a log file after the programming.
This function is disabled as a default setting.
“Enable log” check box should be checked and OK
has to be pressed in order to use this log function for the first time.
Once this is enabled. You do not need to setup again from the next use.
Press
“View Log” button to open log file on notepad.
Please be sure the appropriate file path for log file should be specified to use.
①
Please click "Log" button to open setting
dialog "Program Log Settings".
②
The log function is disabled as default setting.
Please check ③ on to enable it.
④
Select the file you want to save the log into
⑤ Click “Browse” to select one.
⑥
Please click "View Log" button to open log
file.
ID file that compiler makes is available for R8C,M16C,M32R,740 families.
You can specify each protect ID to fill each box. And you can fill them at once with loading ID file that a
compiler makes.
The format of ID file is not defined. Therefore there may be some ID file that cannot be read. This
function is confirmed to work with ID file that R8C compiler makes.
Please specify a name of an ID file that was
made by compiler and press "Open" button to
activate ID settings.
①
②
③
④
⑤
⑥
name of an ID file