Hoist Fitness L-90900, Руководство пользователя

Страница: 40 / 42

40
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to part 15 of FCC rules. In accordance with the FCC, operation of this equipment is subject to the
following guidelines:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
The HOIST® LeMond® Series RC uses, generates, and can radiate radio frequency energy. If the equip-
ment is not installed and used in accordance with the instructions provided in this Owner’s Manual,
interference with radio communications may occur. The intent of the FCC Class B regulations is to
provide reasonable protection against interference when installed in a residential application. However,
there is no guarantee that interference will not occur in a particular installation. If your installation does
cause interference to radio, television or other electronic equipment reception, turn off the power to the
HOIST® LeMond® Series RC to verify that it is the source of the interference. If so, attempt to correct the
interference by the following measures:
• Relocate the unit to increase the distance between the HOIST® LeMond® Series RC and the af-
fected electronics.
• Reorient or relocate the receiving antennae for your television, radio or other electronic equip-
ment that is in the vicinity.
• Consult HOIST® Fitness Customer Service, your authorized dealer, or a qualified radio/television
technician for help.
IC Regulations
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisee aux deux conditions suivantes : (1) l’appareil ne doit pas produire
de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi, meme si
le brouillage est susceptible d’en compromettre le fonctionnement.
This product has also been tested and certified to meet the following standards:
• CAN/CSA 22.2 No 68
• CAN/CSA 22.2 No. M91
• UL 1647
• ASTM F1250
• ASTM F2276
• EN 957-1
• EN 957-5
• EN 60335-1
• EN 61000-6-1
• EN 61000-6-3
• EN 300328
• EN 301489-1
• EN 301489-17
APPENDIX