Hoggi SWINGBO-VTi XL, Инструкция по эксплуатации

Страница: 23 / 39

23
The armrest with tilt compensation remains as horizontal as possible
during the tilting movement and is therefore more suitable for use with a
table.
The height can be adjusted in x1.5 cm steps by repositioning the front
and rear screw connections.
To loosen the screws, first tilt the chair to 45°.
Then the front screws can be loosened first.
By using a different hole position, the general angle of inclination can
also be adjusted.
If the front hole is used as shown here, the armrest is aligned more
steeply.
If the rear hole is used, the flatter and more horizontal the armrest is in a
tilted position.
Then loosen the rear screws and adjust the armrests to the desired
height.