Hoffrichter 5CPD10 Скачать руководство пользователя страница 24

Страница: 24 / 130

Chapter 2: Safety Information

•

Do not try to open the device or the power supply unit. Maintenance and repairs
may only be performed by personnel authorised by HOFFRICHTER GmbH.

•

Do not touch live parts of the mains cable or power supply unit if defective. Replace
a defective mains cable/power supply unit.

•

Before cleaning the device, the plug must be disconnected from the electrical outlet.

•

To disconnect the device from the mains supply, unplug it.

•

Do not place any receptacles filled with liquids on the device.

•

Do not place the device anywhere near water containers (e.g. bathtubs).

•

Do not reach for the device under any circumstances if it falls into water.

•

The device must not be used in wet rooms, as humidity penetrating the device
presents a risk of electric shock.

•

Contact a doctor if chest discomfort, shortness of breath, stomach distension,
belching, severe headache, facial pain, skin redness, or other discomfort occurs.

•

The device is not suitable for use in MRI.

•

The device cannot be operated by blind and severely visually impaired persons.

Содержание 5CPD10



































































































































Результаты поиска

Содержание 5CPD10

Отзывы:

Похожие инструкции для 5CPD10

Бренды по названию

Популярные бренды

Hoffrichter 5CPD10, Руководство пользователя

Результаты поиска

Содержание 5CPD10

Отзывы:

Похожие инструкции для 5CPD10

Бренды по названию

Популярные бренды