5
Ver. 04-2015
ENGLISH
Use and Maintenance Manual
WARNING
T
hIs
mANuAl
Is
AN
INTeGRAl
pART
of
The
INsTAllATIoN
mANuAl
WhIch
should
be
coNsulTed
coNceRNING
sTARTING
ANd
usING
The
mAchINe
sAfely
.
R
eAd
cARefully
befoRe
coNTINuING
.
1.1 GENERAL
The machine has been constructed in conformity with
the current EC Directives and the technical standards
implementing the requirements, as stated in the
declaration of conformity issued by the manufacturer
and attached to the manual.
This publication, hereinafter simply referred to as
‘manual
’, contains all the information required to
safely use and service the machine referred to in the
Declaration of Conformity.
This appliance, hereinafter is generically referred
to as ‘
machine’
.
The manual addresses operators instructed on the
precautions to take in relation to the presence of
electric current and moving devices.
This publication is intended for all ‘users’ who as
far as within their competence need to and/or are
obliged to give instructions to others or operate on
the machine themselves.
These persons can be identified as follows:
▪
operators directly involved in transporting, storing,
installing, using and servicing the machine from when
it is put on the market until when it is scrapped;
▪
direct private users.
The original Italian text of this publication consti-
tutes the only reference to resolve any interpreta-
tion controversies related to the translation into the
European Community languages.
This publication forms an integral part of the machine
and must therefore be kept for future reference until
final dismantling and scrapping of the machine.
1.2 PURPOSE OF THE MANUAL
This manual, and the installation manual, contains
the instructions required to use the machine safely
and carry out routine maintenance work.
Any calibrations, adjustments and extraordinary
maintenance operations are not considered in this
document as they may only be performed by the
service engineer who must work on the machine ac-
1. FOREWORD
cording to the technical and rated characteristics for
which it was built.
Though it is fundamental to read this manual, it
cannot replace skilled technical staff who must be
adequately trained beforehand.
The foreseen use and configurations of the machine
are the only ones allowed by the manufacturer; do
not attempt to use the machine in a different way.
Any other use or configuration must be agreed in
advance with the manufacturer in writing and in
this case an annex will be attached to this manual.
For use, the user must also comply with the specific
workplace legislation in force in the country where
the machine is installed.
The manual also refers to laws, directives, etc., that
the user must know and consult in order to accom-
plish the goals that the manual sets out to achieve.
1.3 WHERE AND HOW TO KEEP THE
MANUAL
This manual (and relative attachments) must be kept
in a safe and dry place and must always be available
for consultation.
Make a copy and keep it in the archive.
When exchanging information with the manufacturer
or the technical assistance staff authorised by the
former, quote the rating plate information and the
serial number of the machine.
This manual must be kept for the entire lifetime of
the machine,
and if necessary (e.g.: damage making
all or some of it illegible, etc.) the user must request
another copy exclusively from the manufacturer,
quoting the publication code indicated on the cover.
1.4 MANUAL UPGRADES
This manual is an integral part of the machine and
reflects the state of the art at the moment it was
put on the market. The publication complies with the
directives in force on that date; the manual cannot
be considered inadequate as a result of regulatory
updates or modifications to the machine.
Any manual upgrades that the manufacturer may see
fit to send to users will become an integral part of
the manual and must be kept together with it.
Introduction
