HOFFEN GS-1231, Инструкция по эксплуатации

Страница: 27 / 37

3
27
6. SET CONTENTS
1x Fabric steamer
1x Measuring jug
1x Attachment with bristle brush
1 x User’s manual
Open the packaging and carefully take out the product. Make sure the set is complete
and intact. Check that the plastic parts are not broken, and the power cord is not
damaged. If you find that any components are missing or damaged, contact the
vendor and do not use the device. Keep the packaging or dispose of it in accordance
with local regulations.
Caution! For the sake of children’s safety, do not leave any packaging
materials accessible and unattended (plastic bags, cardboard boxes,
Styrofoam, etc.). Risk of suffocation!
7.1 Before first use.
1. Take out the fabric steamer from the packaging and unfold the cable.
2. If attached, remove the protective foil from the steam plate.
7.2 Refilling the water tank
1. Make sure the device is disconnected from the power source.
2. Unscrew the water tank from the device main body by rotating it left –
if you are holding the handle with your right hand – so that the round
bullet point on the bottom of the body is pointing at the open padlock (the
marks are printed on the tank: locked padlock/open padlock).
3. Turn the water tank upside down, open the silicone plug, and fill the
tank with water up to the “max” indication on the tank. You may use the
included measuring jug.
CAUTION! The water level must not exceed the maximum level. Indicated
on the tank: MAX.
4. Close the opening with the silicone plug. Turn the tank back to its normal
position and screw it to the device body, so that the round bullet point on
the bottom of the body is aligned with the closed padlock printed on the
tank.
7. USE