instruction manual
SU27
Specifications:
Wingspan: 300 mm
Length: 360 mm
Takeoff Weight: 36 grams
Motor: Brushless 1103 8000KV
Servo: 2.0g x 2 pcs
Receiver: DSM2 or Frsky, 2.4GHz (for Bind and Fly version)
Battery: 7.4v(2S) 150 mah~180 mah 25C (Recommended)
Binding procedure:
Place the plane on level ground and connect the flight battery. When the red led on receiver
flashes rapidly, select the bind on transmitter and confirm.
Red led turning solid means binding successful. Disconnect the battery and re-connect; the tail
surfaces will move up and down 4 times which means calibration is successful and the plane is
ready to fly.
If the flight battery is low on power, the binding may fail. Please replace with a fully charged flight
battery pack.
If the plane doesn’t work properly, please cycle the Su27 power and your transmitter power by
turning on and off and repeat the above procedure once again.
Attention:
Ensure the receiver and the transmitter share the same protocol, if not binding will
fail.
1
