1 Startup/shutdown of a mzr-pump
Instruction for startup/shutdown
1.5
Problem shooting
If the pump stops operating abruptly or has difficulties with starting operation,
please undertake the following steps:
Try to liberate the micro annular gear pump:
by turning the potentiometer knob back and forth or by connecting an
analog voltage
via the control software
by pressing with a syringe a suitable flushing liquid (see table 1 and table 2)
through the micro annular gear pump
by changing the operating direction of the pump.
If these measures turn out to be ineffective, please contact the service staff of
HNP Mikrosysteme and send the pump back to the manufacturer for
inspection.
Warning
You should under no condition
try to disassemble the pump by yourself. This
may cause damage to the pump components and consequently annul your
warranty claims.
1.6
Return of the micro annular gear pump to the manufacturer
For the return of a micro annular gear pump and components that have already
been employed, please follow the instructions:
drain any remaining rests of the delivered liquid from the pump
flush the pump with an adapted solvent
remove the filter elements from integrated or loosely delivered filters
protect all openings against dust with the delivered protective plugs or
screws
return the pump in its original packing
The service personnel which carries out the repair should be informed about
the condition of the already used micro annular gear pump. This is done by
means of the "Declaration of media in contact with the micro annular gear
pump and its components" (see chapter 3). This form may also be downloaded
from the web site
www.hnp-mikrosysteme.de/download
.
!
The "Declaration of liquids in contact with the micro annular gear pump and
its components" must imperatively be filled in. The nature of liquid which
entered into contact with the micro annular gear pump and its components
must be specified.
In case of non-compliance, the sender will be liable for any resulting injure to
persons or any object damage.
Last update: March 2015
Technical data subject to change without prior notice!
8
