HNC Electric HV610C Series, Руководство пользователя

Страница: 121 / 176

Section V. Parameter Function Table
108
10bit
VDO2
Positive logic
0
Negative logic
1
100bit VDO3
Positive logic
0
Negative logic
1
1000
bit
VDO4
Positive logic
0
Negative logic
1
10000
bit
VDO5
Positive logic
0
Negative logic
1
Virtual digit output function , which is similar with control board DO output function , can be used to
cooperate with virtual digit input VDIx, to realize some simple logic control.
When virtual VDOx output function selecting 0, VDO~VDO5 output states is determined by input
states of X1~X5 on the keyboard.VDOx and DIx one-to-one corresponding.
When virtual VDOx output function selecting non-zero digits, VDOx function setting and use
method are same with F5 group DO output relevant parameters, for details please refer to F5 group.
Similarly, VDOx output valid state can choose positive or negative logic, and set through A1.21.
For VDOx use reference , please refer to applications for VDIx use .
5.20 The second motor control
：
A2.00-A2.65
HV610C can switch operation between 4 motors. The 4 motors could set motor nameplate
parameters, tune motor parameters, use V/F control or vector control, set encoder relating
parameters and set V/F control or vector control relating parameters respectively.
Groups of A2
、
A3
、
A4 are corresponding to motor2
、
motor3
、
motor4 respectively. And
the layout of the 3 groups of function codes are completely consistent .
For details please refer to relating parameters of motor1.
Code
Description/
Keyboard Display
Setting Range
Factory
Setting
Change
Limit
A2.00 Motor type selection
General asynchronous motor 0
0
★
Variable frequency asynchronous motor 1
Permanent magnet synchronous motor 2
A2.01 Rated power 0.1kW~1000.0kW -
★
A2.02 Rated voltage 1V~2000V -
★
A2.03 Rated current
0.01A~655.35A(Inverter power <=55kW)
0.1A~6553.5A(Inverter power >55kW)
-
★