Intesis
TM
INMBSMID---I000
User’s Manual r
1.3 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
17 / 24
4.5
DIP-switch Configuration Interface
All the configuration values on INMBSMID---I000 can be written and read from Modbus
interface. Otherwise, some of them can also be setup from its on-board DIP-switch interface.
The device has DIP-switches SW1, SW3 and SW4 on the following locations:
The following
tables apply to the interface’s configuration
through DIP-switches:
SW1
–
AC indoor unit’s features
SW1-P1..4 Description
AC Unit does not have AUTO mode (Default value)
AC Unit has AUTO mode
AC Unit does not have DRY mode (Default value)
AC Unit has DRY mode
AC Unit does not have fan AUTO mode (Default value)
AC Unit has fan AUTO mode
AC Unit has 2 fan speeds (Default value)
AC Unit has 3 fan speeds
SW3
SW4
SW3 SW4
EIA485
A+ B-
X Y
AC Unit
SW1
ON
1 2 3 4
SW1*
ON
ON
1 2 3 4
1 2 3 4 5 6 7 8
SW3
SW4
ON
ON
ON
ON
ON
ON
V1 V2
Power
ON
ON
*Configuration of SW1 is only
available
in
case
of
INMBSMID001I000. It is not
available
in
case
of
INMBSMID004I000
/
INMBSMID008I000
/INMBSMID032I000.
You should leave switches of
SW1 in default position in case
of
INMBSMID004I000
/
INMBSMID008I000
/INMBSMID032I000.
Options available:
N=1
N=4
N=8
N=32
