HMS eWON FLC 3701, Руководство по установке, Страница: 13 / 18

Plugging the Extension Card into the Base Unit 11 (16)
5.2 Extension Card Insertion
5.2.1 How to Insert into the Flexy Base Unit
Wait 30 seconds after turning off the equipment before inserting (or removing) an extension
card to avoid possible damage to the base unit and the extension cards.
Remove the slot filler of the location the new card will be inserted. To do so, press on both ends
of the cover, note that the hooks are off-centered.
Fig. 5 Remove / Insert an Extension Card or Slot Filler.
1 Hooks to be pressed are off-centered. Press while pulling upwards.
2 Guides to slide down/up the FLC 3701.
Insert the extension card carefully and slide it down until the hook clicks. Make sure the card is
completely inserted.
DO NOT insist if a resistance is felt when trying to insert the card.
Boot the unit for the inserted extension cards to be detected. The web interface of the Flexy
base unit has a diagnostic page showing the extension cards in their order of detection (from left
to right).
FLC 3701 - MPI Extension Card Installation Guide IG-0029-00 1.1