manualshive.com logo in svg

HMS Anybus ABC4011, Руководство пользователя, Страница: 50 / 60

Поделиться
Скачать
HMS Anybus ABC4011 Скачать руководство пользователя страница 50

9.3. Firmware Management

9.3.1. View the Firmware Version

On the Support page, you can view the current applied firmware version.

Figure 40. Support page, Product information example

9.3.2. Firmware and Configuration Compatibility

Compatibility after firmware upgrade
Current configuration is still compatible after upgrading the firmware.

Compatibility after firmware downgrade

9.3.3. Firmware File Validation

Before the firmware file is imported into the system, the firmware upgrade function perform a validation of the
file, to ensure that:

• the firmware is compatible with the Communicator hardware
• the firmware is suited for the product
• the officially HMS software signatures are valid
• that the firmware file is not corrupt or damaged

If the firmware file does not pass the validation, the firmware file is rejected and an error message appear.

Anybus

®

 Communicator

™

 - EtherNet/IP

™

 Adapter to Modbus TCP Server

Firmware Management

Page 46 of 56

SCM-1202-196 Version 1.0

Содержание Anybus ABC4011





























































Отзывы:

Нет отзывов