HMS AB7307, Руководство пользователя

Страница: 16 / 55

About the Anybus X-gateway CANopen 11
Doc.Id. HMSI-168-91
Anybus X-gateway CANopen - PROFINET
Doc.Rev. 2.10
2.6 Hardware Installation
Perform the following steps when mounting the gateway:
1. Set the Node Address and the baud rate for the secondary CANopen network (see “Configura-
tion Switches” on page 9).
2. Snap the gateway on to the DIN-rail (See “External View” on page 6)
The DIN-rail mechanism works as follows:
To snap the gateway on , first press it downwards (1) to compress the
spring in the DIN-rail mechanism, then push it against the DIN-rail as to
make it snap on (2).
To snap the gateway off , push it downwards (1) and pull it out from the
DIN-rail (2), as to make it snap off from the DIN-rail.
3. Connect the gateway to the secondary CANopen network.
4. Connect the gateway to the PROFINET network.
5.
Connect the power cable and apply power
1
2
1
2