HMS Premium BE6000, Инструкция по эксплуатации, Страница: 38 / 96

4. Assembling display screen

Connect the signal wire from display screen
to corresponding wire from controller.
Crowding the extra wire into controller

Connect the display screen (7) to handlebar
and controller (6) using 4 sets of Half-round
bolt
M10X20(A8),Flat
washersφ10(C2).(Attention: To align screw
hole)(See figure 4)
5. Assembling left & right cover

Tighten all the assembling bolt.

Folding frame, Install left foot cover 2 (50)
to inside of base support (8), then put left
foot cover 1 (49) with left foot cover 2 (50)
merge one set, using 5pcs Crosshead self-
lock bolt ST4X16(A16) inside to tighten.

Install Right foot cover 2 (52) to inside of
base support (8), then put right foot cover
1 (51) with right foot cover 2 (52) merge
one set, using 5pcs Crosshead self-lock
bolt ST4X16(A16) inside to tighten.(see
figure 5)

After treadmill on flat, using 4pcs
Crosshead self-lock bolt ST4X16 (A16) to
tighten front-end.

Regarding folding and unfolding instruction, please see Folding, Moving and Unfolding
Instruction mention part.
Warning!