HMS Networks Intesis EIA-485, Руководство пользователя, Страница: 14 / 20

Intesis TM INMBSMIT001I000
User’s Manual r22 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
14 / 20
4.3 DIP-switch Configuration Interface
All the configuration values on INMBSMIT001I000 can be written and read from Modbus
interface. Otherwise, some of them can also be setup from its on-board DIP-switch interface.
The device has DIP-switches SW1, SW3
and SW4 on the following locations:
The following tables apply to the interface´s configuration through DIP-switches:
SW1 – AC indoor unit’s features
SW1-P1..4 Description
Not used (Default value)
Not used
Not used (Default value)
Not used
AC Indoor Unit has 4 or 5 vane positions, swing and auto-vanes (Default value).
AC Indoor Unit has 4 vane positions, swing, but not auto-vanes.
AC Indoor Unit has 3 or 4 fan speeds, with or without fan-auto (Default value).
AC Indoor Unit has 2 fan speeds, without fan-auto
Table 4.1 SW1: AC indoor unit’ s features
SW3 SW4
K1
FIXING
CABLE
EIA485
A B
AC Unit
SW1
SW1
SW4
ON
1 2 3 4
ON
SW3
1 2 3 4
1 2 3 4 5 6 7 8
ON
ON
ON
ON
ON
ON
ON
ON
ON