Intesis
TM
BACnet Server
– PROFINET
User Manual r1.0 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
31 / 46
6.
PROFINET Module
Secure HICP
Intesis gateway supports the Secure HICP protocol used by the IPConfig tool for changing settings like IP address,
Subnet mask, and enable/disable DHCP. This configuration interface can be used if configuration via the PROFINET
configuration tool (via PROFINET DCP) is not possible or desired. By default, it is disabled but it can be enabled from
Intesis MAPS tool.
When the application is started, the network is automatically scanned for Intesis BACnet-PROFINET modules. The
network can be rescanned at any time by cliking
Scan
.
To change the network settings of a BACnet-PROFINET module, double-click on the corresponding entry in the list.
A window will appear, containing the settings of the module.
Validate the new settings by cliking
Set
or click
Cancel
to cancel all changes. Optionally, the configuration can be
protected from unauthorized acces by a password.
FTP Server
The built-in FTP-server is used to do firmware upgrades using HMS Firmware Manager tool. By default, it is disabled
but it can be enabled from Intesis MAPS tool.
By default, the following port numbers are used for FTP communication:
•
TCP, port 20 (FTP data port)
•
TCP, port 21 (FTP command port)
The FTP server supports up to two concurrent clients.