For more detailed operating instructions, go to www.hme.com/userManuals.cfm
For HELP call HME Technical Support at 1-800-848-4468 or Fax (858) 552-0172
Wireless 6400
Drive-Up Communication System
HME# 400G583S
Rev A 5/26/06
BELT-PAC OPERATION:
Mode
Setup
Routine
Operation
CHANGE BATTERY:
If you hear “Battery low” or “Change battery” in your headset;
Slide battery-release latch in direction of arrow
Place battery in battery-charger port for recharging
Install fully charged battery in Belt-Pac
Push To Talk
One-Touch Hands Free
With power off
Press
+
+
Release buttons
With power off
Press
+
+
Release buttons
In this mode,
press and hold A1 or A2 button
to talk to customer
In this mode,
press and release A1 or A2 button
to talk to customer
Customer arrives
You hear alert sound in headset
Double beeps for drive-up stalls
Single beeps for drive-thru lane
Press & hold or
You hear stall number or
“drive-thru” in headset
Speak/Listen to customer
Release or to stop talking to
customer
Press & release to end
communication with customer
Customer arrives
You hear alert sound in headset
Double beeps for drive-up stalls
Single beeps for drive-thru lane
Press & release or
You hear stall number or
“drive-thru” in headset
Speak/Listen to customer
Press & release to end
communication with customer
If there are more customers waiting to be served, you will automatically be alerted for
the customer who pushed the call button first. Customers in the drive-thru lane will be
served ahead of customers in drive-up stalls.
Power on/off
Headset volume up
Headset volume down
or Select & talk to next customer
Disconnect from customer
