Quick Start Guide
HM ELECTRONICS, INC.
2848 Whiptail Loop, Carlsbad, CA 92010 USA
Phone: 1-800-848-4468 Fax: 858-552-0172
Website: www.hme.com Email: [email protected]
HME# PUB - 00072
Rev C 02/04/22
NEXEO | HDX™ HS7000
AIO HEADSET
The HS7000 is an all-in-one headset used for communicating with employ-
ees and customers in a store or drive-thru lane environment. It uses one
rechargeable lithium-ion battery (BAT70). With moderate use in a typical
environment, the headset will operate for approximately eight hours on a
single battery charge. It will alert you when the battery charge is low.
Fig. 1
HME
Power Button
(blue)
BAT70 Battery
(not included)
HEADSET
Front View
HEADSET
Side View
Earpad
Lane 1
Lane 2
Raised sections on
the bezel allow users
to identify keypad
buttons by touch.
Status
LED
Boom
LED
Status
LED
Volume Up
Volume Down
Action
Group Chat
Battery Release
Latch (silver)
Keypad Reference Table
Icon Label
Status LED Boom LED Status/Description (voice commands are initiated by saying "Ok Nexeo" first)
Lane 1
Green
Green
Tap to talk to lane 1. The Status LED flashes green while the Boom LED turns on solid
green. Tap again to stop. The Status LED turns solid; the Boom LED turns off.
Voice Command: "lane 1" (to listen only) or "talk to lane 1," or "change lane" if in lane 2
Lane 2
Red
Red
Tap to talk to lane 2. The Status LED flashes red while the Boom LED turns on solid red.
Tap again to stop. The Status LED turns solid; the Boom LED turns off.
Voice Command: "lane 2" (to listen only) or "talk to lane 2," or "change lane" if in lane 1
Volume
Up
Tap to increase volume (the headset beeps become louder as confirmation). Press and
hold to maximize volume to loudest. Voice Command: "volume up" or "volume #"
Volume
Down
Tap to decrease volume (the headset beeps become quieter as confirmation). Press and
hold to minimize volume to quietest. Voice Command: "volume down" or "volume #"
Group
Tap for group chat. Both Status and Boom LEDs flash quickly, alternating red & green.
Tap again to stop.
Action
No function. Reserved for future functionality.
Notes
: Both the Status and Boom LEDs flash slowly with alternating colors
when the headset needs to be paired. A yellow
Status LED
indicates a low battery. The low battery Status LED is also accompanied by audio prompts.
Voice commands
can be used instead of tapping the keypad but must first be enabled on the Base Station. To use voice com-
mands, begin by saying "Ok Nexeo," then, once the Boom LED turns on white continue with a voice command (see above table
for specifics). Volume # levels are 1-15. (E.g., saying: "Ok Nexeo, volume 12," changes the volume level to 12. Mute is 0).
