© 2022 HME Clear-Com Ltd. All rights reserved.
11
Fig. 24
Channel default output transmit power is set to the maximum power allowable for the channel�
If you would like to decrease transceiver output power, click the arrow on the Manual Power field
labeled "Default" and from the pop-up list, scroll and select power output desired� Tap "Save," it
will take a few minutes to reset the transceiver and apply changes, and display changes�
Fig. 25
CHANNEL SETUP - INTERCOM CHANNELS
EQUIP can be set up as a single or dual-channel wireless intercom� The Default is Dual Channel�
Please note that an Equip wireless intercom does not support a dual-listen functionality, i�e�, a user
cannot listen to both intercom channels simultaneously� The user is only capable of talking and lis-
tening to a selected channel�
Fig. 26
For Single Channel operation, go to SYSTEM>SETTINGS, and from the drop-down list select Chan-
nel Setup, tap on the Single Channel button under Channel Setup (the selected button is blue, see
Fig� 27)� Tap the "Save" button to update setting�
