HLA BK48LF, Руководство оператора

Страница: 16 / 32

16
Bumper Assembly
The bumper assembly is used as a guide to help centre
the bale on the cutting arm teeth and main frame. Models
BK60 and 72 feature an adjustable bumper that makes it
possible to accommodate different sized bales.
Product Features
Wrap Undresser
The undresser assembly is used help remove the bale
wrap after the wrap has been cut and the bale contents
empties. The undresser is easily adjustable to suit the
bale and wrap type.
!
CAUTION
Operational Hazard
Personal Protection Equipment
(PPE) is required while adjusting
or maintaining this machine.
SNL00001
Storage Stand
All Bale Knife models are shipped with a convenient
storage stand. Use the storage stand to place your bale
knife in when not in use. The stand helps to stabilize the
bale knife for safe storage and can be easily moved using
a lift fork on you power unit.
!
CAUTION
Operational Hazard
Be aware of sharp cutting
arm blades and tines. Cutting arm must
aways be stored in the up position. Use
caution and keep distance when walking
around the blades and tines.
SL00009H
Wrap Grabber
The automatic wrap grabber keeps the wrap and netting
separate from the feed. The grabber is hydraulically
activated as the cutting arm cuts thru the bale, grabbing
the wrap and net so that the bale contents fall away freely.