4
Model Number
_________________________________________________________
Serial Number
_________________________________________________________
General Information
Serial Number Location
The purpose of this manual is to assist you in safely operating and maintaining your
SB Series
in a safe manner. Read
this manual carefully to obtain valuable information and instructions that will help you achieve safe and dependable
service. The illustrations and data used in this manual were current at the time of printing, but due to possible engineering
and or production changes, this product may vary slightly in detail. Horst Welding HLA reserves the right to update and or
change components as necessary without notification.
In this manual the
SB3000, SB4000, SB5000 & SB6000
series may be referred to as SB Series, SB snow blade,
attachment or machine.
References may be made to the power unit which is the engine-driven, loader equipped machine to which this product is
attached: skid steer, telehandler, wheel loader, or tractor.
OPERATOR ORIENTATION - The directions left, right, front, and rear, as mentioned throughout this manual, are
determined when sitting in the power unit driver’s seat, and facing in the direction of travel
Intended Use
The HLA Snow SB3000, SB4000, SB5000 & SB6000 series Snow Blade is intended for attachment and use on qualified
power units for the sole purpose of clearing snow.
Parts List
The parts lists and hydraulic schematics for this product can be found online. Visit
and click on the PARTS
tab to be directed to our online parts catalogue.
California Proposition 65
You may see a warning label like the following:
WARNING
Cancer and Reproductive Harm
www.P65 Warnings.ca.gov
This warning is required by California Proposition 65 (Prop 65), which is meant to notify California residents of exposures
to Prop 65-listed chemicals. For more information go to ‘www.P65Warnings.ca.gov.’
The serial number for your SB series is located on the back top right side of the mould board.
Please record your serial number here as a handy reference. In case of warranty issues, your dealer will ask for the serial
number to verify your warranty.
Manufactured by
HORST WELDING
MODEL NO.
SERIAL NO.
MADE IN CANADA
