1
E05251-B11010-00
2008 HYUNDAI GENESIS COUPE 2.0L TURBO
Part Number: 48004-KB001
Version: 01152009
NOTICE
This manual assumes that you have and know how to use the tools and equipment necessary to safely
perform service operations on your vehicle. This manual assumes that you are familiar with typical
automotive systems and basic service and repair procedures. Do not attempt to carry out the operations
shown in this manual unless these assumptions are correct. Always have access to a factory repair manual.
To avoid injury, follow the safety precautions contained in the factory repair manual.
INSTALLATION PROCEDURE
1. REMOVAL OF FACTORY PARTS
(1)
Disconnect the negative terminal from the battery
2. INSTALLATION OF THE KIT
(1)
Remove the bolt in section A, and temporarily install the Bracket. (Dia.1)
(2)
Install the Circle Plate to the Bracket. Do not over-tighten the bolt. (Tightening Torque =
2.5-3.5 N-M / 0.25-0.35 kg-m) (Dia.1)
