15
MM06UE01-2002
5.1 Assembling the linear motor system
Secure the screws with retaining rings to prevent them from accidentally coming loose!
Steps to assemble the linear motor system:
Remove the shipping devices.
Remove the transportation safety device from the forcer housing.
Remove the cover or bellows if the mounting holes are inaccessible.
Drill mounting holes in the mounting surface in accordance with scale drawing (see Technical Information and
Approval Drawing).
Clean mounting surface.
Place the mounting bolts in the mounting holes and tighten them in a spiral motion from inside to outside with
applied torque (See Table 5.1).
If the cover or bellows were removed, install them back.
Fig. 5.1
Assembling the linear motor system – here for an LMSSA linear motor system
Table 5.1
Mounting torque
Screw Size
Torque (kgf-cm)
Screw Size
Torque (kgf-cm)
M2
5
M6
120
M2.5
10
M8
310
M3
20
M10
690
M4
40
M12
1200
M5
90
M16
2000
