Hiwin HM-S, Руководство по сборке

Страница: 4 / 100

4
General information
Assembly Instructions
Linear Axes HM-S and HT-S
HMS_HTS-01-0-EN-1905-MA
1.
General information
1.1 About these assembly instructions
These assembly instructions are intended for planners, developers and operators of systems who plan for and install HM-S
and HT-S linear axes as machine elements. They are also intended for persons who perform the following tasks in connection
with the above mentioned axes:
Transportation
Assembly
Electrical connection including connection to the higher-level control system
Integration into a security system
Retrofitting or upgrading
Setup
Commissioning
Operation
Maintenance
Cleaning
Troubleshooting and error elimination
Shutdown, disassembly and disposal
Version Date Notes
01-0 May 2019 Initial creation of this document
Table 1.1 Version management
1.1.1 Version management
1.1.2 Requirements
We assume that
operating personnel are trained in the safe operation practices for HM-S and HT-S linear axes and have read and under-
stood these assembly instructions in full;
maintenance personnel maintain and repair the HM-S and HT-S linear axes in such a way that they pose no danger to
people, property or the environment.
1.1.3 Availability
These assembly instructions must remain constantly available to all persons who work with or on the HM-S and HT-S linear
axes.