Hiwin 25.12345, Руководство по сборке

Страница: 50 / 64

50
Appendix 1: Accessories and spare parts
Assembly Instructions
Linear Tables HT-L
HTL-01-0-EN-1905-MA
Table 11.2 Article numbers and dimensions for long clamping profiles
Suitable for
linear table
Type A B C D Ø E Ø F G Suitable screw Article number,
4 pcs
HT200 1) , HT250 1) Size 8 28.0 22.0 19.5 8.0 15.0 9.0 10.0 DIN 912 M8 25-000520
1) Preferred type for axis mounting
Unit: mm
11.2 T nut
T nut for the frictional connection of the linear tables. Flexible fastening options through the grooves on the side and on the
bottom of the axis profile. Sets are available with ten T nuts.
Table 11.3 Article numbers and dimensions for T nuts
Suitable for linear table Type A B C Article number, 10 pcs.
HT150 Size 6 M5 4.5 17.0 M5 20-000530
HT150 1) Size 6 M6 5.5 17.0 M6 20-000531
HT200, HT250 Size 8 M5 7.5 23.0 M5 20-000532
HT200, HT250 Size 8 M6 6.5 23.0 M6 20-000533
HT200, HT250 1) Size 8 M8 7.5 23.0 M8 20-000534
1) Preferred type for axis mounting
Unit: mm
C
B
A
Ø D1
Ø D2 A
11.3 Centring sleeve
Centring sleeves that are inserted in the carriage’s mounting holes for precise, repeatable load bearing. Sets are available
with ten centring sleeves.
Fig. 11.4 Dimensional drawing of T nut
Fig. 11.5 Dimensional drawing of centring sleeve