Hiwin 25.12345, Руководство по сборке

Страница: 14 / 64

14
Options of the linear tables
Assembly Instructions
Linear Tables HT-L
HTL-01-0-EN-1905-MA
4.3 Carriage
The carriage has threads for mounting the imposed load. These feature additional counterbores that can take centring
sleeves.
Fig. 4.2 Carriage with mounting threads
4.4 Limit switches
The linear tables feature two inductive PNP or proximity switches that signal the end positions of the travel distance. The
limit switch cables can be routed either directly to the interface or into the mounting groove. limit switches are available as
N/C or N/O contacts, with or without plug.
4.4.1 Limit switch dimensions
Fig. 4.3 Limit switch dimensions
8
Connection
LED indicator 270°
Threaded
mounting hole
2.5
Ø 3.2
Ø 2.9
40 20
10
4.5
8.1
Properties N/C contact (25-000786) N/C contact (25-000787) N/O contact (25-000788)
Housing Rectangular
Dimensions (W × H × D) 8 × 8 × 40 mm
Max. sensing range 2 mm
Switching frequency 2,000 Hz
Connection type Cable with M8, 3-pin plug,
100 mm
Cable, 3-wire, 4 m Cable, 3-wire, 5 m
Output type PNP
Electrical wiring DC 3-wire
Protection class IP67, IP68 1)
1) According to EN 60529
Table 4.2 General features of the limit switches
4.4.2 Limit switch specifications