Hivertec motionCAT HCPCI-MNT720M, Руководство пользователя

Страница: 60 / 168

49
3.4.4 Switch Settings
On the top face of the module, there are switches for selecting the operation.
Figure 3.4-3 DIP switches for module setting
(1) Encoder A-phase/B-phase method selection DIP SW1-1, 2
SW1 1 2
Open collector ON ON
Differential OFF OFF
Table 3.4-3 DIP SW for encoder A-phase/B-phase method selection
(2) Encoder Z-phase method selection DIP SW1-3
SW1 3
Open collector ON
Differential OFF
Table 3.4-4 DIP SW for encoder Z-phase method selection
(3) CMP
→
STA DIP SW1-4
SW1 4
Enable ON
Disable OFF
Table 3.4-5 DIP SW for CMP
→
STA switching
(4) Counter clear (CLR)/Counter latch (LTC) selection DIP SW2
SW2 1 2 Remarks
Both CLR and LTC are disabled OFF OFF DLS input enabled
Use CLR
ON OFF
DLS disabled by the software.
Use LTC OFF ON
This function provides three input options to select from for the deceleration sensor (DLS).
When using CLR or LTC, disable DLS by the software.
Table 3.4-6 DIP SW for Counter clear/ Counter latch selection
DIP SW1 DIP SW2
Default
setting
Front face direction