INTRODUCTION
Version 1.0, 12/2014. Copyright 2012 Hitron Technologies
22
Version 1.0, 12/2014. Copyright 2014 Hitron Technologies
22
Hitron CGNM-2250 User’s Guide
Take the following steps to manually set up your computer’s IP address to connect to
the CGNM-2250:
NOTE:
This example uses Windows XP; the procedure for your operating system
may be different.
1
Click
Start
, then click
Control Panel
.
2
In the window that displays, double-click
Network Connections
.
3
Right-click your network connection (usually
Local Area Connection
) and click
Properties
.
4
In the
General
tab’s
This connection uses the following items
list, scroll
down and select
Internet Protocol (TCP/IP)
. Click
Properties
.
5
You can get an IP address automatically, or specify one manually:
If your CGNM-2250’s DHCP server is active, select
Get an IP address
automatically
.
If your CGNM-2250’s DHCP server is active, select
Use the following IP
address
. In the
IP address
field, enter a value between
192.168.0.2
and
192.168.0.254
(default). In the
Subnet mask
field, enter
255.255.255.0
(default).
NOTE:
If your CGNM-2250 is not using the default IP address, enter an IP address
and subnet mask that places your computer in the same subnet as the
CGNM-2250.
6
Click
OK
. The
Internet Protocol (TCP/IP)
window closes. In the
Local Area
Connection Properties
window, click
OK
.
Your computer now obtains an IP address from the CGNM-2250, or uses the IP
address that you specified, and can communicate with the CGNM-2250.
1.5
Login into the CGNM-2250
Take the following steps to login into the CGNM-2250’s GUI.