HITROL HPV-20N Series Скачать руководство пользователя страница 9

Страница: 9 / 15

HTM(HPV)-20N Series

HITROL CO., LTD.

AMP and

Wiring

Settings

The power specifications of HTM (HPV)-20N Series is AC 90~240V and DC +24V, check

and supply the power voltage before wiring, and then connect it to the output

according to use.

- It doesn’t matter if the order of STEP 1 and STEP2 is changed.

- When STEP 3 setup, all relay settings are initialized.

(Delay Time: 1 Sec., Return Time: 1 Sec., Relay Out: Normal Closed)



LED

- MAIN: Power on/off and operation state

- SENSOR: Detection of medium

- RELAY: Relay operation



Tact Switch

- Setting button



Terminal Block

- AC: AC Input power

- F.G: Field ground

- DC: DC input power

- CONTACT 1 & 2: Output (DPDT)

■ Sensitivity Adjustment of Solid

1) Sensitivity Setting

Set as below before installation.

STEP 1

STEP 2

STEP 3

(VIBRATING)

(NON-VIBRATING)

- Press and hold the + + buttons to turn on the red LED.

- When it is vibrating state, press and hold the button for 1 second

to turn on the green LED.

- Press and hold the + + buttons to turn on the red LED.

- When it is not vibrating state, press and hold the button for 1 second to

turn on the green LED.

※ The sensitivity is determined by the intensity of vibration.

Press the + + + buttons for 1 second to turn on and off the green LED

and thus finish the setting.

Содержание HPV-20N Series
















Результаты поиска

Содержание HPV-20N Series

Отзывы:

Похожие инструкции для HPV-20N Series

Бренды по названию

Популярные бренды

HITROL HPV-20N Series, Инструкция по эксплуатации

Результаты поиска

Содержание HPV-20N Series

Отзывы:

Похожие инструкции для HPV-20N Series

Бренды по названию

Популярные бренды