HITROL HPV-20N Series Скачать руководство пользователя страница 6

Страница: 6 / 15

HTM(HPV)-20N Series

HITROL CO., LTD.

The HTM(HPV)-20N_Series is installed on the top or the side of a container and silo to

detect the upper or the lower limit, respectively. The level switch can be installed on any

material, so it is applicable to ferrous or nonferrous tanks and silos.

When installing this product, consider the following.

Installation on Side (Horizontal)

■

A-Type or B-Type can be installed on the side of a tank. A screw-socket shape under

24mm shall be used for installing the A-Type on the side. Otherwise, dust or foreign

matter may enter, resulting in a malfunction. The extended B-Type supports the screw

and the flange.

■

When side installation, it shall be installed slopingly (more than 15°) with a direction of

wider side of tuning fork vertically to avoid build-up of the medium on the tuning

fork. (Refer to Fig. 1)

■

Sensor shall be installed at the place far from inlet of the tank and protector shall be

installed in order to protect the sensor from damage by falling medium if it is installed

at the inlet. (Refer to Fig. 1)

When installing the product, install it using a tool that fits the hexagon connector of

the screw.

Max. Length shall be 500mm or less for a side installation.

Ex-proof Version

Attachment
& Precautions

HPV-20N(H)-A

HPV-20N(H)-B

<Screw Type>

<Flange Type>

Содержание HPV-20N Series
















Результаты поиска

Содержание HPV-20N Series

Отзывы:

Похожие инструкции для HPV-20N Series

Бренды по названию

Популярные бренды

HITROL HPV-20N Series, Инструкция по эксплуатации

Результаты поиска

Содержание HPV-20N Series

Отзывы:

Похожие инструкции для HPV-20N Series

Бренды по названию

Популярные бренды