HTM(HPV)-20N Series
HITROL CO., LTD.
11
- Press and hold the + buttons to turn on the red LED.
- Use or to set the Delay Time with the button. Then, press and hold the + buttons
for 1 second to turn on and off the green LED and thus finish the
setting.
(Max. 60 Sec. / Min. 1 Sec. @ 1 Sec. Step).
- Press and hold the + buttons to turn on the red LED.
- Use or to set the Return Time with the button. Then, press and hold the + buttons for
1 second to turn on and off the green LED and thus finish the
setting.
(Max. 60 Sec. / Min. 1 Sec. @ 1 Sec. Step).
The factory standard setting of sensitivity is set according to the medium,
so please keep this in mind when using it.
LED Color
Control and operation state can be checked with the main LED.
and States
LED Color
LED State
Operation
GREEN
On
Normal Operation
Turned on and off
Sensitivity Setting (STEP 3)
Changes and saves the relay contact time
Changes the relay contact time
RED
On
Enters the relay delay and return setting mode
Enters the sensitivity
YELLOW
Turned on and off
Threshold is reached with the relay delay time
setting.
Blinking
No factory max. and min. value settings
■ Relay Delay Time Adjustment
It sets delay time of relay operation after the medium is detected by the sensor.
■ Relay Return Time Adjustment
It sets return time of relay operation after the medium is detected by the sensor.
■ Relay Out Control
It can change the output contact. (N.C.
N.O.
…
N.C.)
Press and hold the + buttons for 1 second to turn on and off the green LED and thus finish the setting.
2) Activation Point Setting
It sets the activation point to user’s desired point as following the
STEP 2 STEP 3
of
Sensitivity Setting
(Page 10). (However, the medium shall come in contact with the sensor.)
