HM-95 Series
HITROL CO., LTD.
16
User Training
Warranty
and Contact
Warranty and Service
This product is subject to a two-year warranty upon shipment and free service
will be provided for any damage found under normal operating conditions. If tro
ubles that occur are not due to product failure, service charge will apply.
You can request A/S from our website or by contacting our headquarters.
Headquarters, Factory, and Research Center (Contacts)
Address: Hitrol, 141, Palhakgol-gil, Jori-eup, Paju-si, Gyeonggi-do, Republic of Korea
(Palhakgol-gil 98)
HITROL CO., LTD. 141, Palhakgol-gil, Jori-eup, Paju-si, Gyeonggi-do, Korea
TEL.: 031-950-9700 (Headquarters and A/S)
FAX: 031-943-9796–9799 (Headquarters and A/S)
Do not apply a Non-ex-proof product in an Ex-proof zone.
An ex-proof product can be used where the environment and liquid inside the co
ntainers are of zone 1 and 2.
Read and understand the aforementioned and make sure that the temperature of
the object to be measured does not exceed 120℃ for general purpose, or 500℃
for high temperatures. For an ex-proof type, the maximum is 350℃. In addition,
make sure that the ambient temperature of the housing is kept at -20 – +80℃.
Ensure that a high-temperature cable is used for high-temperature products
(to prevent cable damage).
An ex-proof product is a pressure-resistance and ex-proof type, so do not open
the cover while using it.
Ex-proof products are designed according to Article 34 of the Industrial Safety and Healt
h Act and Article 58.4 of the Enforcement Rules of the same Act.
