HTM-930 & HLC-901 Series
HITROL CO., LTD. 9
L: Local
P: Panel Inside
Installation-
The model configuration of the HTM-930 & HLC-901 Series is shown below.
HTM-930
HLC-901*
■ Warranty and Service
The warranty period of this product is two years after shipment of the product and after
sales service will be provided free of charge during this period for problems that would
have occurred during normal use. If after sales service is requested for matters other than
product issues, charges may be requested regardless of the warranty period.
A/S can be requested through our website or below head office.
■
Head office · Factory · Laboratory Contact Number
ADDRESS: HITROL CO., LTD 141(98), Palhakgol-gil-road, Jori-eup, Paju-si, Gyeonggi-do, Korea
TEL: (+82)-31-950-9700 (Head Office and A/S)
FAX: (+82)-31-950-9796~9799 (Head Office and A/S)
■ If there is no change in output contact even though the medium is detected, check as
shown follows.
Status
Check Point
POWER (PWR.) LED is Off
Check wiring of power, and power On/Off
SENSING (DET.) LED is Off
Adjustment of Sensitivity using
SENS. dial
■ If there is no vibration from the sensor even though the medium is not detected, check
as shown follows.
Status
Check Point
POWER (PWR.) LED is Off
Check wiring of power, and power On/Off
Weak vibration of sensor
Adjustment of Sensitivity using
SENS. dial
Wrong wiring of cable
Check the fastening of direct cable outlet
Check the correct wiring to each color of cables
Bent sensor
Contact Hitrol’s after sales service team
Model
Notation
Failure
Check and
Solution
Warranty
and
Contact
