6.
SETTING Way
■ HIGH Auto SETTING
■
, , When pressed at the same time for about 1 second,
The LED turns on and off and the value is set.
■
Because the initial value is OFF, setting the current value to HIGH
Changes to ON and the LED keeps blinking.
■ LOW Auto SETTING
■
, , When pressed at the same time for about 1 second,
the LED turns on and off and the value is set.
■
Since the initial value is OFF, if the current value is set to a LOW value,
the LED stays on while maintaining the OFF state.
■ Auto Setting and confirm
1. Press to confirm C(current value), H(High value), and L(Low value).
2. If the value of C is higher than H, the Relay ON status LED keeps blinking.
3. If the value of C is lower than L, the Relay OFF status LED is ON.
