HCC-95P Series
HITROL CO.,LTD.
11
Marking
User
Training
Warranty
and Contact
■
Warranty and Service
This product is subject to the warranty for 2 years of shipment and unpaid service will
be provided for any damage found under normal operating conditions. If it is not about
the failure of product, the service charge will be payable.
You can request A/S at our website or by contacting our headquarters.
■
Headquarters
․
Factory
․
Laboratory Contact Number
ADDRESS: HITROL CO., LTD 141, Palhakgol-gil, Jori-eup, Paju-si, Gyeonggi-do, Korea
T E L : 031-950-9700 (Headquarters & A/S)
F A X : 031-943-5600 (Headquarters & A/S)
■ Product Identification
- The product identification mark is attached onto the housing and shows the
model name, serial number, working temperature, working pressure, and matters
regarding output. The serial number is a unique manufacturing number for the
identification of products.
<Ex-proof Version>
Under the aforementioned, the temperature of fluids in the tank where the product is used
shall not be exceed 80℃ for general type and 150℃ for high-temperature type. In addition,
make sure that the ambient temperature of housing is kept at -20 - +60℃. In the case of
an explosion-proof type product, never open the cover of the product during use. Ex-proof
products are designed according to Article 34 of the Industrial Safety and Health Act
and Article 58.4 of the Enforcement Rules of the same Act.
<
Weather-proof Version
>
Do not apply a Non-ex-proof product in an Ex-proof zone. Ex-proof products can
only be installed at zone 1 and 2 of locations where explosive gas atmosphere
exists. It shall be installed in compliance with the ex-proof temperature rating
and the applied fluid temperature.
