HiTi Digital P520L, Руководство пользователя, Страница: 23 / 27

23
Chapter 7. Error Message Handling
◎
Error Message and Corrective Actions
LCD Message
Status Corrective Action
0100 Cover Open The front cover is opened Close the front cover
0101 Cover Open fail The front cover is not
opened Press the button
❶
again
to reset
0200 IC chip missing No RFID key Make sure the RFID tag
attached on the cover of
spool
0201 Ribbon Missing No Ribbon detected Load the ribbon spool
0202 Ribbon Mismatch Installed ribbon does not
match RFID tag Replace the right RFID tag
and adhere to ribbon
spool
0203 Security Check fail Unsupported ribbon type Replace to the right
ribbon
0300 Ribbon Out The ribbon is empty Replace the ribbon
0400 Paper Out Paper is not loaded Load the paper roll
0401 Paper Out The paper is empty Replace the paper roll
0402 Paper Not Ready Paper roll is installed
incorrectly Reload the paper roll in
right direction
0500 Paper Jam Paper jammed while
printing Remove jammed paper
0600 Paper Mismatch Loaded paper roll size is
not match to ribbon Replace the right paper
roll size
◎
Failure Symptoms
When detecting a failure symptom, check the printer regarding the following
table.
Symptom
Action
Power is not switch on
●
Please check if the power cable is firmly
connected
The personal computer does not
recognize the printer Check if the USB cable is connected to the
personal computer or printer
The printer does not ready
●
Check if the front cover is properly closed
●
Check if paper is jammed in the printer
●
When the paper setting lamp goes off, insert
the edge of the paper until the paper setting