5
IOM_CLVBA-CLVA_401_208095_200801_EN
CLVBA-CLVA
EVAPORATION UNITS AIR-AIR
INTRODUCTION
Incorrect Operation
In case of breakdowns or operation faults, turn the unit off.
Periodic Inspections and Maintenance
Carry out periodic inspections to detect possible damaged or broken parts. If these parts are not repaired,
people injuries or material damages could be caused. Disconnect the power supply of the unit before
carrying out any maintenance operation.
Make sure that the maintenance areas are accessible. If these areas have to be invaded by the lateral air
supply and/or return ducts, verify that the design of the ducts allows the access to the fans and that they
are not a hindrance when replacing the filters. If that is not possible make sure access is possible from the
other side.
All operations shall be carried out in accordance with the local safety regulations.
Repairing Operations
The reparations shall always and exclusively be completed by trained personnel previously authorized by
the manufacturer and only original spares shall be used. The safety devices of the unit may be damaged
in case of non-compliance with these warnings.
Modifications
The manufacturer will not respond to possible warranty claims and damages of the unit in case of electrical and/or
mechanical modifications. The unauthorized manipulation, reparation or modification of the unit will automatically invalidate
the warranty.
Packaging and Replacement of Equipment
The material of the package (plastic bags, insulating materials, nails, etc.) is a potential source of danger.
Consequently, it should be kept out of the reach of children and properly recycled according to the valid
local safety regulations.
Do not mix this product with household waste at the end of its life. Due to the refrigerant, oil and other
components contained in this product, it must be dismantled by professional installers. All the
waste, depending on its nature shall be sent to recycling, composting or treatment plants, or to an
authorized management agency in accordance with the current local legislations.
Refrigerant
This product is hermetically sealed and its operation depends on the use of R-410A which is a HFC fluorinated greenhouse
gas.
REGULATIONS AND CERTIFICATIONS
ISO 9001 CERTIFICATION:
HIPLUS AIRE ACONDICIONADO S.L., by endeavouring to always gain the maximum
satisfaction from their customers, obtained the ISO 9001: Quality System for its design and production activities. That result
shows our continuous determination to improve quality and the reliability of all our products. Our commercial activities,
design, raw materials, production processes and after-sales service represent the means to reach our goal.
CE MARKING
: Our products are CE marked according to the essential requirements of the applicable EC directives and
their last modifications and comply with the national legislation of each country.