º
6
IOM_ACVBA-ACVA_351a2402_207958_180109_EN
ACVBA-ACVA
PACKAGED VERTICAL COMPACT UNITS
AIR-AIR
INTRODUCTION
Utilization
The unit will be used only for the purpose it has been designed for. Any other use does not imply any kind of liability or
responsibility from the manufacturer.
Incorrect Operation
In case of breakdowns or operation faults, turn the unit off.
Periodic Inspections and Maintenance
Carry out periodic inspections to detect possible damaged or broken parts. If these parts are not repaired,
people injuries or material damages could be caused. Disconnect the power supply of the unit before
carrying out any maintenance operation.
Make sure that the maintenance areas are accessible. If these areas have to be necessarily invaded by
the air supply and/or lateral return ducts, verify that the design of the ducts allows the access to the fans
and that they are not a hindrance when replacing the filters. If that is not possible make sure access is
from the other side.
All operations shall be carried out in accordance with local safety regulations.
Repairing Operations
The reparations shall always and exclusively be completed by trained personnel previously authorized by
the manufacturer and only original spares shall be used. The safety devices of the unit may be damaged
in case of non-compliance with these warnings.
Modifications
The manufacturer will not respond to possible warranty claims and damages of the unit in case of electrical and/or
mechanical modifications. The unauthorized manipulation, reparation or modification of the unit will automatically invalidate
the warranty.
Refrigerant
This product is hermetically sealed and contains R-410A which is a HFC fluorinated greenhouse gas.
REGULATIONS AND CERTIFICATIONS
ISO 9001 CERTIFICATION:
HIPLUS AIRE ACONDICIONADO S.L., by endeavouring to always gain the maximum
satisfaction from their customers, obtained the ISO 9001: Quality System for its production activity. That result shows our
continuous determination to improve quality and the reliability of all our products. Our commercial activities, design, raw
materials, production processes and after-sales service represent the means to reach our goal.
CE MARKING
: Our products are CE marked according to the essential requirements of the applicable EC directives and
their last modifications and comply with the national legislation of each country.
In accordance with Article 1, (m) Subject matter and scope of Regulation (EU) 2016/2281 of November 30
th
, 2016 concerning the
ecodesign requirements for air heating products, cooling products, high temperature process chillers and fan coil units, the equipment
mentioned in the present document shall be used only for applications of which the primary function is the purpose of producing or storing
perishable materials at specified temperatures by commercial, institutional or industrial facilities and of which space heating and/or space
cooling is a secondary function and for which the energy efficiency of the space heating and/ or space cooling function is dependent on
that of the primary function. Therefore they are not valid for comfort applications in spaces occupied by people.
