INTEGRATING YOUR STEREO SYSTEM WITH YOUR VCR
Hookup
When your VCR is connected to a stereo system, you can:
• Make high quality "audio only" recordings for up to 6 hours (on a T-120 video cassette tape).
• Receive quality stereo sound from your VCR through your stereo system.
• Use the VCR as an extra audio tape deck for dubbing.
* PURCHASED SEPARATELY
To record from stereo
BEFORE YOU BEGIN...
• Make sure the VCR is connected to your stereo system, as shown above.
• Make sure that
"STEREO"
audio is selected from the VCR Set-Up Menu, as shown on
page 38,
of
"RECORDING OPERATIONS"
section,
"Stereo vs. mono sound".
•
Select VCR recording speed (
SP
or
EP
) as shown on
page 33,
of
"RECORDING OPERATIONS"
section,
"Basic recording steps".
1 Press the AVX button on remote control, so that L1 (line) on the TV display.
2 Turn on the stereo, and start the selection you wish to record.
3 Press the REC/IRT button on VCR or REC button on the remote control to start recording.
4 Press the STOP button to stop recording.
