PRESET FOR USE
26
10 Start the clock
Press MENU or SELECT button.
Although seconds are not displayed, they begin counting from 00 when you press
MENU or SELECT button. Use this feature to synchronize the clock with the correct
time.
NOTES:
When unplugging the AC-cord or if there is a power failure for more than 30 seconds, "--:--"
flashes on the display.
If the display shows an abnormal reading or no reading, unplug the power cord for more
than 30 seconds. Then plug it back in.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1) Press MENU button.
2) Press CH/SET
or
button repeatedly to point to "INITIALIZE".
Then, press SELECT button.
3) Press CH/SET
or
button repeatedly to point to "SETTING CLOCK".
Then, press SELECT button.
4) Select a digit you want to change using SELECT button or ADD/DELETE button.
5) Enter correct numbers using CH/SET
or
button.
6) Press MENU button to return to original mode.
