CONTROLLING VCR INPUT & OUTPUT
20
If your cable service supplies you with a cable converter box, you can use the basic
connection shown below
See Cable Converter Diagram.
NOTES:
With this connection, you CANNOT record one program and while viewing another.
Channel memory programming is NOT needed when using this connection.
CONTROLLING VCR INPUT & OUTPUT
VIDEO OUTPUT CHANNEL SETTING (BACK OF VCR)
When the VCR is in the Playback mode, or when the VCR/TV button is in the VCR
position, you TV will receive the signals from the VCR on either channel 3 or 4. Set the
3CH/4CH selector switch to the station that is not used for normal broadcasts in your
area; then set your TV to that same channel when viewing from the VCR.
The video output channel of this unit is set to channel 3 prior to shipment from the
factory.
INPUT SELECT
To use the external input jack, select the AUX position. Press CHANNEL "
" or "
"
button or enter "00" with number button so that "AUX" appears on the screen.
VIDEO MODE SELECTION ON TV
TV power must be on. Please see your TV's owner's manual for details.
