Getting Started (Initial Setup)
2 MOVIE
Press 2 to select whether you want prerecorded movies (safety tab removed) to play
automatically when loaded, and then rewind, eject and turn off the power when done.
Options are <ON> and <OFF>.
3 CODE
Press 3 to enable the remote control to control a second VCR. Options are <VCR1>
and <VCR2>.
7 CABLE BOX SET
Press 7 to set up your cable box if you receive all channels through a cable box.
8 AUTO CHANNEL SET
Press 8 to automatically program the VCR to receive all the channels that come in on
your antenna or cable.
9 ADD/ERASE CHANNEL
Press 9 to bring up a screen that lets you add new channels or limit the channels to the
ones you most often watch.
Note:
Option 7 CABLE BOX SET is not enabled unless CATV 1 or CATV 2 has been
selected in option 1 CHANNEL setting.
Setting the Clock
This is easy to do and important for your later timed recordings.
You'll need to set the clock when first hooking up your VCR, and any time the power
goes out more than 1 hour.
When you first plug in the VCR or after a power outage, the clock display will read "--:--
".
To set the clock, press GUIDE, then press 6 to bring up the Clock Set screen:
Press the number buttons on the remote control to set the current time - two digits for
the hour and two for the minutes. Then press 1 or 2 for AM or PM, respectively.
For example, if it is now 2:15 PM, press 0, 2, 1, and 5 for hours and minutes, and press
2 for PM.
Continue pressing buttons to set the date. For example, if today is July 8, 1994, press 0,
7, 0, 8, 9, and 4 to get 07/08/94.
When you're done, press GUIDE twice to return to regular viewing.
If the SETUP VCR PLUS message continues flashing, set VCR Plus+ channels
referring to the procedure in "Matching Broadcast CH numbers to VCR Plus+ channels"
on page 43. You may set the VCR Plus+ channels after you are familiar with your VCR.
Содержание VT-M284A
Страница 50: ...Advanced Operations Synchro Editing happen ...