Hitachi VM-8400LA - Camcorder страница 3 Скачать руководство пользователя | Manualshive

Страница: 3 / 63

background image

PRECAUTIONS

3

PRECAUTIONS

WARNING:

TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK).
NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may

have sufficient magnitude to cause electric shock. Therefore, it is dangerous
to make any kind of contact with any inside part of this unit.

This symbol alerts the user that important literature concerning the

operation and maintenance of this unit has been included. Therefore, it
should be read carefully in order to avoid any problems.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.

Warning:

This device complies with Part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired
operation.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct by one or more of the
following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and the receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
--Consult the dealer or an experienced radio/TV technician for help.

Caution to the user:

Changes or modifications not expressly approved by the manufacturer

could void the user's authority to operate the equipment.

«
1
2
3
4
5
...
»

Содержание VM-8400LA - Camcorder
































































Отзывы:

Нет отзывов

Похожие инструкции для VM-8400LA - Camcorder

Бренд: Canon Страницы: 85

Бренд: Hyundai Страницы: 20

Бренд: Lavod Страницы: 21

ViewCam VL-A111S

Бренд: Sharp Страницы: 67

VIEWCAM VL-A110U

Бренд: Sharp Страницы: 72

Бренд: Sony Страницы: 40

Бренд: Sony Страницы: 131

Бренд: Sony Страницы: 96

DCR-SR220 Handycam®

Бренд: Sony Страницы: 172

Бренд: Sony Страницы: 196

Бренд: Sony Страницы: 260

Бренд: Samsung Страницы: 61

Бренд: Samsung Страницы: 71

Бренд: Samsung Страницы: 121

Бренд: Samsung Страницы: 117

Бренд: Samsung Страницы: 119

Бренд: Samsung Страницы: 117

Бренд: Samsung Страницы: 124

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды