Hitachi VM-8400LA - Camcorder, Инструкция по эксплуатации

Страница: 27 / 63

DATE/TIME SETTING
27
DATE/TIME SETTING
The date and time can be recorded on your tapes to act as a handy reference when viewing
them at a later time.
Use the following procedure to set up this display for the current date and time. The time
backup battery is rechargeable. Charge the backup battery every two months. Set
"CAM/OFF/VIDEO" to "OFF" position and connect a charged battery or AC adaptor/charger to
the camcorder for 24 hours.
Make sure that the current time is displayed correctly before you start recording.
NOTES:
The backup battery should be charged every two months. If it is not charged
periodically, it will be over-discharged and its life will be shortened.
• A cassette cannot be loaded or ejected when setting the date and time.
1. Press and hold the small button on "CAM/OFF/ VIDEO", and then slide it to "CAM" position.
2. Press "DATE/TIME".
Date and time appear in the viewfinder or LCD monitor and " 1 " flashes.
3. Press "F.FWD" to select correct month. Hold button down to advance rapidly. If you go past
the month you want to set, press "REW/REVIEW". When the correct month appears, press
"STOP/EJECT".
4. Press "F.FWD" to select correct date. Hold button down to advance rapidly. If you go past
the date you want to set, press "REW/REVIEW". When the correct date appears, press
"STOP/EJECT".
5. Press "F.FWD" or "REW/REVIEW" to select year, and then press "STOP/EJECT".