Hitachi VM-1800A - Camcorder страница 13 Скачать руководство пользователя

Страница: 13 / 68

POWER SOURCES

To attach, align the mark " " of the battery with that of the camcorder so that the

battery fits into the groves, and slide the battery downward, as illustrated.

To remove the battery:

Push and hold

"Battery"

release lever, then slide the battery to the upside and remove.

WHEN USING WITH THE AC ADAPTER/CHARGER (Provided)

Plug the AC adaptor/charger power cord into AC electrical outlet.

Connect one end of the DC cord (provided) to the

"DC IN 9.6V"

of the AC

adaptor/charger.
Connect the other end of the DC cord to the

"DC OUTPUT"

of the AC adaptor/charger.

NOTES:

The AC adaptor/charger cannot charge the battery and operate the camcorder at the

same time.

When using the AC adaptor/charger to power the camcorder, the batter level indicator

may display
"

". This indicator is used for battery operation and has no meaning when using the AC

adaptor/charger to power the camcorder.

WHEN USING WITH THE CAR BATTERY (By using optional car battery

cord Hitachi VM-CC70A)

Содержание VM-1800A - Camcorder





































































Результаты поиска

Содержание VM-1800A - Camcorder

Отзывы:

Похожие инструкции для VM-1800A - Camcorder

Бренды по названию

Популярные бренды

Hitachi VM-1800A - Camcorder, Инструкция по эксплуатации

Результаты поиска

Содержание VM-1800A - Camcorder

Отзывы:

Похожие инструкции для VM-1800A - Camcorder

Бренды по названию

Популярные бренды